Industry News

How to maintain the machine tool for CNC parts processing manufacturers is a crucial issue!


There are many machine tools in CNC parts processing manufacturers that have problems due to lack of maintenance, so we need to pay certain attention to the maintenance of CNC machining machines.

The maintenance of CNC machining tools is divided into daily inspection, weekly inspection, monthly inspection, quarterly inspection, and semi annual inspection. CNC parts processing manufacturer

Daily inspection:

The main projects include hydraulic systems, spindle lubrication systems, guide rail lubrication systems, cooling systems, and pneumatic systems. Daily inspection is to check based on the normal condition of the system, for example, to check if the coolant in the coolant tank is sufficient and if it is not added in a timely manner.

Weekly inspection:

Its main projects include machine tool parts and spindle lubrication system, which should be checked correctly every week, especially for machine tool parts that need to be cleaned of iron filings and external debris.

Monthly inspection:

Mainly inspect the power supply and air dryer, as well as the lubrication of the x, y, and z axis rails. Under normal conditions, the rated voltage of the power supply is 180v~220v, with a frequency of 50Hz. If there is any abnormality, it should be measured and adjusted. The air dryer should be disassembled once a month, then cleaned and assembled. The three-axis track surface must ensure good lubrication.

Quarterly inspection:

Mainly inspect the machine bed, hydraulic system, and spindle lubrication system. For example, when inspecting the bed of a machine tool, the main focus is on whether the accuracy and level of the machine tool meet the requirements in the manual. If there are any problems, the mechanic should be contacted immediately. When inspecting the hydraulic system and spindle lubrication system, if there are any problems, they should be replaced with new oil and cleaned separately.

Half year inspection:

Six months later, CNC parts processing manufacturers should check whether all buttons are sensitive and normal, and inspect the hydraulic system, spindle lubrication system, and X-axis of the machine tool. If there are problems, they should replace them with new oil and clean them.

Under the premise of reasonable use, CNC parts processing manufacturers should attach importance to the maintenance work of CNC machine tools, increase investment in maintenance work, do a good job in the maintenance work of CNC machine tools, improve the service life of CNC machine tools, and ensure the normal use of CNC machine tools.

We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept